The Nation’s Oldest and Largest Scanner-Only Dealer
1-800-SCANNER

  Home > Accessories > Multicouplers >

  SP-1300 Combiner/Splitter
SP-1300 Combiner/Splitter


 
MSRP: $59.95
Our Price: $49.95
You Save: $10.00

Stock Status: In Stock
Product Code: 24-531025
Qty:

Details
 
8-1300MHz
BNC Connectors
Are you looking for an inexpensive option to run two scanners sharing the same antenna? Multi-couplers can be pretty costly. Why not try a cheaper solution?. With the SP-1300 Combiner/splitter and jumper coax cable (sold separately) you can hook up two scanners to one antenna with minimal to no signal loss.

This is a simple hook up:

Step One – Run your antenna coax cable to “Input’ on the SP-1300
Step Two – Connect “Output A” to Scanner One via BNC
Step Three – Connect “Output B” to Scanner Two via jumper cable (sold separately)
See photo below.

After testing the SP-1300 for over a month, it works like charm, with no signal lost.

RG58 Jumper Cable, 3', BNC Male to BNC Male
RG58 Jumper Cable, 6', BNC Male to BNC Male
Click for larger image.


Average Customer Review: 4.5 of 5 | Total Reviews: 7 Write a review.

  0 of 0 people found the following review helpful:
 
Not for 800 Mhz. October 3, 2014
Reviewer: Sean Kelley from Rulo, NE United States  
On first scanner(output A), everything is fine.
On the second antenna line, (output B),
it won't let 800 Mhz signals through.




Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Good Splitter September 26, 2014
Reviewer: AirThunder from Brandywine, MD United States  
This splitter is well made and I found no insertion loss or degradation in performance of my scanners since inserting it.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Best splitter ever purchased July 18, 2014
Reviewer: Wadie E. Suttles III from Chattanooga, TN United States  
This splitter solved my co-phasing experience with tradition splitters. Because of my scanner monitoring experience consisting of VHF and 800mhz broadcast, with the use of a Scantenna Dipole and a 800mhz yagi, my monitor experience has blossomed.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
SP-1300 June 16, 2014
Reviewer: Joe Jones from Garner, NC United States  
put the splitter on my GRE 600 & BCD 996XT into an SCT 2 antenna without any noticeable  signal loss. very satisfied.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Splitter March 14, 2014
Reviewer: Michael Jenner from Bellerive, Tasmania Australia  
This is the only one I found on the net which was claimed to have no insertion loss. I certainly have not noticed any degradation in performance of my scanners since inserting it.
Mike, VK7FB

Was this review helpful to you?

View All Customer Reviews