You are here: Home > Accessories > Antenna Accessories > Multicouplers
Sort By:
1
MCA216M VHF/UHF Receiver Multicoupler 16 Port MCA216M VHF/UHF Receiver Multicoupler

MCA216M is an active multicoupler designed to distribute VHF/UHF antenna signals to sixteen (16) VHF/UHF receivers simultaneously without loss of signal

Our Price: $895.00
Out of Stock
4 Port MCA204M VHF/UHF Receiver Multicoupler - 25 MHz to 1 GHz 4 Port MCA204M VHF/UHF Receiver Multicoupler - 25 MHz to 1 GHz

-Broad Frequency Range
-25 MHz Input High-Pass Filter
-No Signal Loss to Output Ports
-Rugged Cast Aluminum Case

Our Price: $229.00
Out of Stock
4 Port MCA704/BN 700 MHz Receiver Multicoupler 4 Port MCA704/BN 700 MHz Receiver Multicoupler

MCA704/BN is an active multicoupler designed to distribute antenna signals to four receivers without loss and with high isolation between ports. It is specifically suited for signal intercept stations, both fixed or mobile platforms, 700 MHz service band monitoring, trunk-tracking, etc.. It can be used in any UHF monitoring platform using receivers, scanners or spectrum analyzers.


The MCA704/BN has a mechanical and electrical design construction that will meet any government, military or commercial specification. This unit is designed to give high performance results in any radio monitoring post using multiple intercept receivers. Rugged die-cast aluminum enclosure with a black powder coat finish is standard, olive-drab green (MIl-841OD) is also available on request


The basic use of the receiver multicoupler is to enable several radios , or scanners, to share a common antenna system. The advantage of using a multicoupler in signal monitoring applications were several receivers are used (such as in SIGINT/COMINT), is in the port-to-port isolation of the coupler. Isolation will reduce the possibility of RF interaction between receivers caused by local oscillators, synthesizers, etc. If an external pre-amplifier, receive filter or lightning protection device is used, only one is needed to service several receivers


Both Passive and Active broad-band models as well as narrow-band specialty couplers are manufactured to meet a multitude of HF, 700MHz monitoring applications. Standard port configurations from 2 up to 8 are available. These units are designed to meet government and commercial radio monitoring demands as well as the general hobby market. Active models include broad-band low-noise amplifiers, front-end protection, and, depending on model, input High-Pass or Low-Pass Filters


Choose from one of the two length options for connecting the multicoupler to the scanner:

RG58 Jumper Cable, 3', BNC Male to BNC Male
RG58 Jumper Cable, 6', BNC Male to BNC Male

Our Price: $219.95
Out of Stock
4 Port MCA804/BN 800 MHz Receiver Multicoupler - 820 MHz to 890 MHz 4 Port MCA804/BN 800 MHz Receiver Multicoupler - 820 MHz to 890 MHz

-820 MHz to 890 MHz
-25 MHz Input High-Pass Filter
-No Signal Loss to Output Ports
-Rugged Cast Aluminum Case

Our Price: $219.95
Out of Stock
8 Port MCA208M VHF/UHF Receiver Multicoupler - 25 MHz to 1 GHz 8 Port MCA208M VHF/UHF Receiver Multicoupler - 25 MHz to 1 GHz

-Broad Frequency Range
-25 MHz Input High-Pass Filter
-No Signal Loss to Output Ports
-Rugged Cast Aluminum Case

Our Price: $369.00
Out of Stock
SP-1300 Combiner/Splitter SP-1300 Combiner/Splitter

Combiner/splitter 1 antenna/2Rx or 2 antenna/1 RX, 8-1300 MHz, BNC connectors

MSRP: $59.95
Our Price: $49.95
You Save: $10.00
In Stock
   
 
1