Home > Software > Comtekk >

AvCall SELCAL Decoder Software Download
SELCAL Decoder Software Download


 
Our Price: $39.95

Stock Status: In Stock


Availability: Download Now
Product Code: 31-521679
Qty:

Basics
 
Aviation Selective Calling System
SELCAL Encoder 3.0





The low cost software-based SELCAL encoder

Used by airlines and aeronautical radio operators to "page" specific aircraft during flight via HF or VHF radio. Quick installation and setup, simple to use.
  • Up to 64 user-defined Memory Presets
  • Control any transmitter directly with ComTekk Universal Radio Interface
  • Operates as a dispatch console with computer headset
  • PTT (Push-to-Talk) via serial/USB or VOX
  • Log file keeps record of SELCAL calls sent
  • Security features keep codes and settings confidential
  • Built-in calibration system for high accuracy
    (not required when used with ComTekk Universal Radio Interface).
  • 15-Day Free Trial
Read on for complete description...OR see the online User Manual.

How it works:

ComTekk SELCAL generates Aviation SELCAL or selective-calling tones using your computer's sound card:




ComTekk's SELCAL system is compatible with virtually any radio when used with the Universal Radio Interface.
(Note: EIA tone-remote is not currently supported by ComTekk SELCAL)

SELCAL is an international signaling protocol which allows airline radio operators to contact specific aircraft over HF of VHF radio while in flight. The SELCAL decoder on board each aircraft is assigned a unique 4-letter code. This allows the receiver audio to be muted until that code is received, alerting the crew there is a radio call for them. This way, they do not have to be distracted by radio traffic intended for other planes.

ComTekk SELCAL (meets ARINC-714 / ICAO Annex 10 international standard) is a dual-tone (2x2) format similar to DTMF, but uses 16 different tone frequencies. Each digit or letter in the code sequence refers to an audio tone frequency. The first two digits comprise the first tone pair, and the last two digits determine the second pair of tone frequencies.

ComTekk SELCAL includes a convenient auto-calibration system which compensates for errors in the sound card's timebase, ensuring accurate tones are produced. Accuracy is critical, as the tone frequencies must be very precise in order to be decoded by the aircraft's electronic decoder.

NOTE:

For best results, we highly recommend using our Universal Radio Interface, which has a temperature-stabilized quartz oscillator for highly accurate tone encoding.

We cannot guarantee the specifications of any third-party equipment used with or controlled by our software products. Use of our software is limited to the terms and conditions as provided within the included end-user license agreement (EULA) available for download at our website.

Due to it’s technical nature, installation and alignment should only be performed by a trained, qualified avionics technician.

Notes:

* If connecting directly to computer, Sound card isolators are highly recommended to prevent possible damage to sound card and computer (included in kit interface). The author assumes no liability for damages of any kind.

For more information on connecting to sound cards, click here. Direct radio interface unit supplied with kits. Call or send an email for more information.

**Minimum System Requirements:

Microsoft Windows 2000/XP/Vista™/ Windows 7™
Software requires less than 10MB disk space
1.0GB RAM
16-bit full-duplex audio device or ComTekk radio interface (recommended)

Share your knowledge of this product with other customers... Be the first to write a review