A professional antenna designed for two-way equipment that demands the most signal possible, this is an outstanding 800 MHz antenna. If you're mainly listening to trunking systems at 800 MHz, then this is the antenna for you! 8 inches tall.

Product Code: 14-540714

For all portables except the BCD396T and BR330T. 4 inches tall.

Product Code: 14-541097

Flexible Whip rubber ducky design, minimum +6dB Gain over standard antenna.

• 700~900MHz UHF Band
  
• Flexible Whip Rubber Ducky
  
• Great improvement over factory standard antenna
  
• 7 inch length
  
• BNC Connector

Replacement Uniden antenna for all portable scanner models (with BNC connector). Also works on all other brands of portable scanners with BNC connectors

Product Code: 10-540710

Telescopic replacement whip antenna with adjustable right angled whip suitable for base and handheld scanners

Product Code: 25-541698

The Condor is a true Multiband design and is a first in flexible antenna technology. Tuned 1/4 wave elements are provided for improved High Band VHF, UHF and 800/1000 Mhz performance. The BNC connector is imbedded in the "Condor's" high density urethane housing to stand up to the toughest handling. Pull in the weak signals with "Condor" State of the Art technology!

Product Code: 04-540709

"The Original"-- It works! Designed for race track use, but great in any high RF environment, this short and unobtrusive antenna helps reduce overpowering signals from nearby transmitter that cause interference with low power units such as those used in race cars. 3/4 inch tall.

Product Code: 02-540550

This professional UHF antenna is tuned for the 450-470 Public Safety, business, and auto racing frequency band. It uses an injection molded helically wound design. The antenna is 1/4 wavelength and has a highly durable strain relief base with a BNC connector for every scanner. It is approximately 3 inches tall, shorter and more durable than the standard rubber-duck antenna.

Product Code: 01-540751

The Remtronix REM-842B VHF/UHF/ BNC 800 MHz. Triband Scanner Antenna

Frequency (MHz): 150-162
Length: 8" Material Injection Molded
Antenna Type : Covered BNC/Helical
Connector: Covered BNC male

Product Code: 20-541794

The W-801 Regular Gainer has been designed to provide a big improvement over the standard flexible whip normally provided with handhelds. High quality engineering and ergonomic design make it a natural replacement.

Product Code: 28-541172

High quality engineering and ergonomic design ensure that it is the natural replacement for those seeking to extend their receiver’s range.

Product Code: 28-541173

The W-889 Tele Gainer gives you the advantage of adjustable length with swivel knuckle joint. As with the other Watson Scanning Antennas, it has been designed to give you the best reception possible.

Product Code: 28-541187

A unique design for the VHF/UHF airband It offers excellent efficiency and can also be used for transmission on the VHF air band.

Product Code: 28-541174

Attach your handheld (HT) or Scanner duck antenna to this Clip Mount, connect the cable BNC to the handheld (or scanner), and then clip the antenna to your hat, jacket, bike, or just about anywhere. Includes 4 ft of RG-174 coax cable terminated in a BNC.

Product Code: 13-540572

BNC Suction Mount for Rubber Duck antennas. Attach your handheld HT's or Scanner's duck antenna to this mount, connect the cable BNC to the handheld, and then stick the suction cup on any smooth surface. Includes 4 ft of RG-174 coax cable terminated in a BNC.

Product Code: 13-540574

Includes a BNC female to BNC male connector and 6 feet of RG174 A/U coaxial cable. BNC Window Mount for Rubber Duck antennas. Attach your handheld HT or Scanner's duck to this mount, connect the cable BNC to the handheld, slip it over your vehicle's window top edge and roll up the window. Great for air travelers who rent vehicles at their destination.

Product Code: 15-530738

Flexible Whip rubber ducky design, minimum +6dB Gain over standard antenna.

• 700~900MHz UHF Band
  
• Flexible Whip Rubber Ducky
  
• Great improvement over factory standard antenna
  
• 7 inch length
  
• SMA Connector (Standard SMA)

A professional antenna designed for two-way equipment that demands the most signal possible, this is an outstanding 800 MHz antenna. If you're mainly listening to trunking systems at 800 MHz, then this is the antenna for you! 8 inches tall. For BC346T, BCD396T, BR330T, BC346XT and BCD396XT

Product Code: 14-541014

This 800 MHz scanner antenna is 1/4 wave and 4.5" tall and will improve reception at 700, 800 and 900 MHz. It has an SMA connector base for the Uniden Bearcat BC346T, BCD396XT, BR330T, BC346XT and BCD396XT scanners. Not that reception on other bands will suffer as compared to the standard rubber-duck antenna..

Product Code: 14-541098

Flexible Whip rubber ducky design, minimum +6dB Gain over standard antenna.

• 700~900MHz UHF Band
  
• Flexible Whip Rubber Ducky
  
• Great improvement over factory standard antenna
  
• 7 inch length
  
• SMA Connector (Standard SMA)

Uniden stock replacement antenna with correct (SMA) connector for the BCD436HP, BCD396T, BCD396XT, BC346XT and BR330T. Does a good job of providing reception across all bands.


Product Code: 10-541225

Telescopic replacement whip antenna with adjustable right angled whip with SMA suitable for base and handheld scanners

Product Code: 25-541697

The Condor is a true Multiband design and is a first in flexible antenna technology. Tuned 1/4 wave elements are provided for improved High Band VHF, UHF and 800/1000 Mhz performance. The SMA connector is embedded in the "Condor's" high density urethane housing to stand up to the toughest handling. Pull in the weak signals with "Condor" State of the Art technology!

Product Code: 04-541508

The Condor is a true Multiband design and is a first in flexible antenna technology. Trimmed to fit SDS100.Tuned 1/4 wave elements are provided for improved High Band VHF, UHF and 800/1000 Mhz performance. The SMA connector is embedded in the "Condor's" high density urethane housing to stand up to the toughest handling. Pull in the weak signals with "Condor" State of the Art technology!

Product Code: 04-542047

HT-55 118-960 MHz Thin Rubber SMA Antenna


Product Code: 40-541720

MH-255 VHF/UHF Mini Rubber Duck Antenna with SMA


Product Code: 40-541716

Antenna for HomePatrol

Product Code:10-541643

This professional UHF antenna is tuned for the 450-470 Public Safety, business, and auto racing frequency band. It uses an injection molded helically wound design. The antenna is 1/4 wavelength and has a highly durable strain relief base with a SMS connector for every scanner. It is approximately 3 inches tall, shorter and more durable than the standard rubber-duck antenna. For BCD436HP, BCD396XT, BCD396T and BR330T.

Product Code: 14-541013

Frequency (MHz): 150-162
Length: 8" Material Injection Molded
Antenna Type : Covered SMA/Helical
Connector: Covered SMA male

Product Code: 20-541958

The Remtronix REM-842S VHF/UHF/ SMA 800 MHz. Triband Scanner Antenna

The WSMA-801 Regular Gainer has been designed to provide a big improvement over the standard flexible whip normally provided. High quality engineering and ergonomic design make it a natural replacement.

Product Code: 28-541178

High quality engineering and ergonomic design ensure that it is the natural replacement for those seeking to extend their receiver’s range.

Product Code: 28-541179

The WSMA-889 Tele Gainer gives you the advantage of adjustable length with swivel knuckle joint. As with the other Watson Scanning Antennas, it has been designed to give you the best reception possible.

Product Code: 28-541188

Tiny tuned powerhouse on the UHF 440-512 MHz and 700/800 MHz public safety scanner bands. It's very small, preferably mounted vertically, and can be placed inconspicuously in a front or back windshield of a car or any window of a home.

Product Code: 01-541850

Tiny tuned powerhouse on the UHF 440-512 MHz and 700/800 MHz public safety scanner bands. It's very small, preferably mounted vertically, and can be placed inconspicuously in a front or back windshield of a car or any window of a home.

Product Code: 01-541849

Uniden stock replacement antenna with correct (SMA) connector for the SDS100. Does a good job of providing reception across all bands.

Product Code: 10-541992