Home > Receivers > ICOM Receivers >

  Icom IC-R75 Receiver
Icom IC-R75 Receiver

Alternate Views:

Note: This product is non-returnable for credit
Our Price: $719.95

Stock Status: Out of Stock
Product Code: 44-501651

Email me when Back-In-Stock
Wide frequency coverage and innovative features...

Expanded frequency coverage
The IC-R75 covers a frequency range that’s wider than other HF receivers; 0.03–60.000000 MHz*. This wide frequency coverage allows you to listen to a variety of communications including marine communications, amateur radio, short wave radio broadcasts and more.
*Guaranteed 0.1–29.99 MHz and 50–54 MHz only

High stability receiver circuit
Icom’s latest wide band technology provides highly stable receive sensitivity over the entire receive frequency range. The IC-R75 makes it easy to catch communications world wide.

Superior dynamic range
A wide dynamic range of more than 100 dB*1, 104.5 dB*2 for 14 MHz band, 102.5 dB*2 for 50 MHz band, and a well-designed triple conversion system help minimize image and spurious responses for better signal fidelity.
*1 Not guaranteed.
*2 Not guaranteed; When PREAMP OFF; CW narrow 500 Hz bandwidth; 100 kHz channel spacing

Twin PBT capability
The PBT (passband tuning) function narrows and moves the IF passband at two stages to efficiently eliminate interfering signals.

DSP capabilities
DSP (Digital Signal Processor) filtering in the AF stage is available with the optional UT- 106 DSP UNIT*. The DSP provides the following functions:
* Already installed with some versions

Noise reduction:
Pulls desired AF signals from noise. Outstanding S/N ratio is achieved, providing clean audio in SSB, AM and FM. Pull weak signals right out of the noise.

Automatic Notch filter:
This automatically minimizes beat signals and protects the receive signal. Also, the notch frequency is automatically adjusted to follow interfering beat signals—reducing interference from RTTY signals during SSB operation for example.

FM mode standard
Unlike many other HF/50 MHz receivers there is no need to install an additional unit for FM mode reception on the 29 and 50 MHz bands.

Flexible filter selection
Up to two optional filters* can be installed, providing flexible band width selection and filter combinations.
*One each for 9 MHz and 455 kHz IF stage.

Alphanumeric readout
The function display has an alphanumeric readout that indicates up to 8-character memory names for easy recognition.

Selectable RF gain/squelch control
The RF gain and/or squelch control can be set to the [SQL] control in set mode to match your operating preference.

Other outstanding features…
-Compact body
-Digital bar S-meter with peak hold
-Front mounted speaker for easy listening
-Internal clock with ON/OFF, sleep timer
-Numeric keypad for direct frequency or memory channel input
-Attenuator • 2-level preamp
-Selectable AGC (FAST/SLOW/OFF)
-Noise blanker
-99 memories plus 2 program scan edges
-Ample scanning functions available
-CW pitch control and CW reverse mode


Frequency coverage 0.03–60.000000 MHz*
*0.03–29.999999 MHz only for Asia version; specifications guaranteed 0.1–29.99 MHz and 50–54 MHz only.
Number of memory channels 101 (99 regular, 2 scan edges)
Frequency stability Less than ±7 ppm from 1 min. to 60 min. after
power on. After that rate of stability less than ±1
ppm/hr. at +25°C (+77°F). Temperature fluctuations
0°C to +50°C (+32°F to +122°F) less than ±5 ppm.
Power supply requirement 13.8 V DC ±15% (negative ground)
Current drain (at 13.8 V DC)
Max. audio

0.9 A
1.1 A
Antenna connector SO-239 (50 Ω), push connection terminal (500 Ω)
Dimensions 241(W) × 94(H) × 229(D) mm
912(W) × 3116(H) × 9132(D) in
Weight (approx.) 3.0 kg; 6 lb 10 oz
REMOTE connector RS-232C D-sub 9-pin
CI-V connector 2-conductor 3.5 (d) mm (18″)

Receive system Triple-conversion super heterodyne system

Intermediate frequencies

1st (MHz) 2nd (MHz) 3rd (kHz)
USB*/LSB* 69.0115 9.0115 455
CW* 69.0106 9.0106 455.9
RTTY* 69.0105 9.0105 456
AM* 69.0100 9.0100 450
FM* 69.0115 9.0115 450
*May differ according to selected IF filter.
Frequency Range


10 dB S/N


10 dB S/N



0.1–1.8 MHz*1 2.0 μV 5.6 μV
1.8–28 MHz*2 0.16 μV 1.6 μV
28–29.99 MHz*2 0.16 μV 1.6 μV 0.22 μV
50–54 MHz*3 0.13 μV 1.0 μV 0.2 μV

*1 Preamp: OFF; *2 Preamp 1: ON; *3 Preamp 2: ON

SQL sensitivity (threshold)

SSB, CW, RTTY Less than 5.6 μV*1
FM Less than 0.32 μV *2

*1 Preamp 1: ON

*2 Preamp 2: ON




More than 2.1 kHz/–6 dB
Less than 4.0 kHz/–60 dB
More than 6 kHz/–6 dB
Less than 20 kHz/–50 dB
More than 12 kHz/–6 dB
Less than 30 kHz/–40 dB
Spurious and image rejection ratio More than 70 dB (except IF through/50 MHz band)
Audio output power More than 2.0 W at 10% distortion with an 8Ω load
PHONES connector 3-conductor 6.35 (d) mm (14″)
External SP connector 2-conductor 3.5 (d) mm (18″)/8Ω

The IC-R75 has been tested to and passed the MIL-STD requirements and strict environmental standards for shock (MIL 810C, D, E) and vibration
(MIL 810C, D, E).

All stated specifications are typical and subject to change without notice or obligations.

Supplied accessories:

  • AC adapter or DC power cable (depending on version)
  • Spare fuse


NOTE: Communications receivers and accessories from AOR and ICOM cannot be returned for credit, only exchange if defective within the first 30 days.

Share your knowledge of this product with other customers... Be the first to write a review