Home > Accessories > Cables & Connectors for PC >

  Uniden USB-1 Programming Cable (BC246/396/330/230/95/996/15/XT)
Uniden USB-1 Programming Cable (BC246/396/330/230/95/996/15/XT)

Our Price: $29.95

Stock Status: In Stock
Product Code: 01-551038

Works for the following scanners:
  • BCT15
  • BCT15X
  • BC95XLT
  • SC230
  • BC246T
  • BR330
  • BC346XT
  • BCD396T
  • BCD396XT
  • BCD996T
  • BCD996XT

    Uniden USB Cable Drivers:
    You must install the following software driver for this USB cable, choose which one depending on your operating system listed below. These are also available through the Uniden.com web site.

    Driver for Windows operating systems:

    You must run this installer prior to plugging in the USB-1 cable. This installer creates the following driver on your system:

  • Windows 8
    Important Windows 8 Information
    The current Prolific Driver, as delivered through their web site and through Windows Update for Windows 8, will not work with older USB-1 cables that use the PL2303HXA chipset. To use these drivers you must have a current USB-1 cable that uses the PL2303HXD chipset. You can still use the older cable under Windows 8, however, you must use "legacy" drivers. We are in the process of checking the 1.6.0 installer for compatibility, but have confirmation that the 1.5.0 installer includes drivers that will work with the older cables.
    You can download those installers here: PL2303 Prolific Driver V1.8.0
    Windows 7/XP Operating Systems
    PL2303 Prolific Driver v1.7.0
    Windows ME/95 Operating Systems
    PL2303 Prolific Driver v1.5.0

    Average Customer Review: 4.5 of 5 Total Reviews: 22 Write a review.

      0 of 0 people found the following review helpful:
    Uniden January 17, 2016
    Reviewer: donald halley from stuttgart, AR United States  
    Idk if the cable is good or not because the process of getting a pc to recognize a uniden scanner or cable is so ridiculously complicated and frustrating. Its truly beyond belief IMHO. I'm not a technical wiz, but I do not have problems with other pc devices and or drivers etc. Uniden should give up the scanner biz if they cant simplify the process of connecting a scanner to a pc.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
    Programming Cable November 10, 2015
    Reviewer: Ken Waren from Gainesville, TX United States  
    The USB-1 programming cable works well. I was able to reprogram my BCD996XT scanner with in 5 minuets.
    The people at Scanner Master were very helpful.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
    Great Fast Service and Delivery October 7, 2015
    Reviewer: William Mahon from Lanesborough, MA United States  
    Sales rep. was very helpful in explaining product and need to update if using Windows 10.  Order was delivered very quickly and ordering was very simple and a pleasant experience.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
    I love controlling my scanner on screen . . . September 4, 2015
    Reviewer: WAGinWNY from Western New York  
    . . . and this cable allows me to do that. Why it's not included with the scanner is beyond me, but that's not ScannerMaster's fault.

    Tip: If you have installed the correct drivers but your computer still cannot connect to the scanner, make sure the computer end is plugged into a port on the computer, and not a USB hub (even if it's powered).

    Was this review helpful to you?

      0 of 1 people found the following review helpful:
    Cant do with it July 30, 2015
    Reviewer: Anonymous Person from Susanville, CA United States  
    The cable the unit came with my computer could not see. This is a must to program by USB.

    Was this review helpful to you?

    View All Customer Reviews