| The "Ferret" is a Multiband Antenna utilizing state of the art engineering techniques. The "Ferret" provides coverage from 25 MHz to 1.8 GHz. The configuration is an array of center fed 1/2 wave elements. Utilization of dielectrically tuned chokes, multi-tuned parallel resonant circuits and asymmetrical elements provides tuned transmit quality on band centers of 40, 100, 122, 146, 155, 315, 465, 865 and 1280 MHz. The "Ferret" can handle trasmit power levels of 100 watts. The "Ferret" is housed in a neat, lighweight, fiberglass radome. An aluminum mounting tube is provided for simple installation to mast or side mounting brackets (not supplied). To provide maximum performance at the higher UHF frequencies the "Ferret" is terminated with an "N" connector.
A 10 dB gain preamp is available for "reception only". The preamp mounts at the antenna and is powered through the coaxial feed line from a matching variable voltage transformer inside yoru home.
Antenna Type: Center Fed half wave on each band 30-1300 MHz Description: Fiberglas radome encloses internal brass and copper consruction of separate radiators for 8 bands, Low VHF, FM Bcast, Aircraft, 2M Band, Hi VHF, SAC (AIR) UHF, 800 Frequency Range: 30-50/88-108/121/146/150-174/225-400/806-896/1.2 Ghz Power Rating in Watts: 100 Gain DBD: 0 on each band center VSWR Bandwidth MHz: Varies with band. Connector Type: Type N female on the antenna - connect to antenna with Male N connector (antenna has a female N)
Size in inches: 102" less mtg. Tube. 120" when installed Weight in lbs (net): 8 as 30lb Shipping info: UPS/oversize
The Ferret requires one of the following Coax Cables to connect from the antenna to the scanner. Choose your desired length from the options below.
|