Home > Receivers > Alinco Receivers >

  Alinco DX-R8 Receiver
Alinco DX-R8 Receiver

Alternate Views:

Note: This product is non-returnable for credit
Our Price: $499.95

Product Code: 48-501592

All-mode Desktop Receiver

Features of DX-R8T/E
  • I/Q signal output allows use of third-party SDR software
  • 150 kHz 35MHz (T-model up to 30MHz) in AM/USB/LSB/CW/FM and IQ modes
  • Front and rear jacks make connecting accessories easy
  • Direct frequency input to the dual VFO system
  • Detachable front-control panel offers more mounting options
  • Large LCD display makes operation simple
  • Front-speaker and powerful 2W audio output makes it easy to hear signals
  • Rugged, die-cast chassis
  • Narrow ceramic filters (AM 2.4kHz/SSB 1kHz) and 0.5kHz audio-filtering for CW
  • 4-level RF preamp/attenuator
  • IF shift and RIT reduces interference
  • Noise blanker enables clearer reception
  • 3 banks/600 memory channels make it easy to save banks of favorite frequencies
  • Two sets of programmed search pairs and varieties of scanning modes
  • Auto-power-off, Sleep-timer, Dial and Key locks, RX indicator illumination and more!
  • Computer utility software makes it easy to manage settings and edit memories
  • Monitor shortwave signals from aviation, navigation and data sources
Standard accessories
  • DC cable (EDC-37)
Optional accessories
  • EDS-17 Front control remote kit (5m cable, front panel bracket, unit cover and hardware)
  • Operating mode: USB, LSB, AM, CW, FM and I/Q output for SDR software
  • Antenna impedance: 50ohm unbalanced
  • Frequency stability: +/-1ppm
  • Power requirement: 13.8V DC +/-15% (11.7 to 15.8V DC)
  • Ground method: Negative ground
  • Current drain: Receiver: 1.0A(max.)
  • Operating temperature: -10digC to 60digC (+14digF to +140digF)
  • Dimensions: 240(w) x 94(h) x 255(d)mm (Projections not included)
    (9.45"(w) x 3.7"(h) x 10"(d)
    240(w) x 100(h) x 293(d)mm (with projection)
    (9.45"(w) x 3.94"(h) x 11.54"(d)
  • Weight: Approx. 4.1kg (144.6oz)
  • Receive circuitry: Double conversion superheterodyne
  • Sensitivity: SSB: (0.15 to 1.8MHz) 0dBu(1uV)
    CW: (1.8 to 30MHz) -12dBu(0.25uV)
    AM: (0.15 to 1.8MHz) +20dBu(10uV)
    AM: (1.8 to 30MHz) +6dBu(2uV)
    FM: (28 to 30MHz) -6dBu(0.5uV)
  • Intermediate frequency: 1st 71.75MHz, 2nd 455KHz
  • Selectivity: SSB, CW, AM(narrow): 2.4KHz/-6dB 4.5KHz/-60dB
    AM, FM: 6KHz/-6dB 18KHz/-60dB
    -6dB: 6KHz or more
    -60dB: 16KHz or less (NFM)
  • Spurious and image rejection ratio: More than 70dB
  • Audio output power: More than 2.0W(8ohm 10%THD)
  • RIT variable range: +/-1.2KHz
DX-R8 Coverage
* 40KHz~150KHz appears on the screen but Below 150KHz is out-of-warranty and not intended for practical use.
  • Receiver Frequency coverage: DX-R8T (USA/Canadian): 150KHz - 29.99999MHzDX-R8E (Worldwide): 150KHz - 34.99999MHz

Note: Specifications are subject to change without notice or obligation.

Share your knowledge of this product with other customers... Be the first to write a review