Alinco DX-R8 Receiver

FAQ

Website Features

(Your shopping cart is empty)

Home > Receivers > Alinco Receivers >

Alternate Views:

Our Price: $499.95

Product Code: 48-501592

Qty:

Details

All-mode Desktop Receiver

Features of DX-R8T/E

I/Q signal output allows use of third-party SDR software
150 kHz 35MHz (T-model up to 30MHz) in AM/USB/LSB/CW/FM and IQ modes
Front and rear jacks make connecting accessories easy
Direct frequency input to the dual VFO system
Detachable front-control panel offers more mounting options
Large LCD display makes operation simple
Front-speaker and powerful 2W audio output makes it easy to hear signals
Rugged, die-cast chassis
Narrow ceramic filters (AM 2.4kHz/SSB 1kHz) and 0.5kHz audio-filtering for CW
4-level RF preamp/attenuator
IF shift and RIT reduces interference
Noise blanker enables clearer reception
3 banks/600 memory channels make it easy to save banks of favorite frequencies
Two sets of programmed search pairs and varieties of scanning modes
Auto-power-off, Sleep-timer, Dial and Key locks, RX indicator illumination and more!
Computer utility software makes it easy to manage settings and edit memories
Monitor shortwave signals from aviation, navigation and data sources

Standard accessories

Optional accessories

EDS-17 Front control remote kit (5m cable, front panel bracket, unit cover and hardware)

Specifications
General DX-R8 ALL MODELS

Operating mode: USB, LSB, AM, CW, FM and I/Q output for SDR software
Antenna impedance: 50ohm unbalanced
Frequency stability: +/-1ppm
Power requirement: 13.8V DC +/-15% (11.7 to 15.8V DC)
Ground method: Negative ground
Current drain: Receiver: 1.0A(max.)
Operating temperature: -10digC to 60digC (+14digF to +140digF)
Dimensions: 240(w) x 94(h) x 255(d)mm (Projections not included)
(9.45"(w) x 3.7"(h) x 10"(d)
240(w) x 100(h) x 293(d)mm (with projection)
(9.45"(w) x 3.94"(h) x 11.54"(d)
Weight: Approx. 4.1kg (144.6oz)

Receiver

Receive circuitry: Double conversion superheterodyne
Sensitivity: SSB: (0.15 to 1.8MHz)   0dBu(1uV)
CW: (1.8 to 30MHz)   -12dBu(0.25uV)
AM: (0.15 to 1.8MHz)   +20dBu(10uV)
AM: (1.8 to 30MHz)   +6dBu(2uV)
FM: (28 to 30MHz)   -6dBu(0.5uV)
Intermediate frequency: 1st 71.75MHz, 2nd 455KHz
Selectivity: SSB, CW, AM(narrow): 2.4KHz/-6dB 4.5KHz/-60dB
AM, FM: 6KHz/-6dB 18KHz/-60dB
-6dB: 6KHz or more
-60dB: 16KHz or less (NFM)
Spurious and image rejection ratio: More than 70dB
Audio output power: More than 2.0W(8ohm 10%THD)
RIT variable range: +/-1.2KHz

DX-R8 Coverage
* 40KHz~150KHz appears on the screen but Below 150KHz is out-of-warranty and not intended for practical use.

Receiver Frequency coverage: DX-R8T (USA/Canadian): 150KHz - 29.99999MHzDX-R8E (Worldwide): 150KHz - 34.99999MHz

Note: Specifications are subject to change without notice or obligation.